VMG blades Installation Instructions

Step 1

The VMG blades Multipin can be adjusted by turning it with a screwdriver so that your fin is at the right height in your fin box. Make sure that the VMG blade’s fin lock is positioned so that the T-nut is in line with the fin box and the lever is perpendicular to the fin box. Insert VMG blades Multipin in your fin box

Step 2

Slide the fin to the desired position in the fin box. Make sure that the VMG blade fin lock is positioned so that the T-nut is in line with the fin box and the lever is perpendicular to the fin box

Step 3

Push the fin down into place. If the fin cannot be pushed down, check that the T-nut is still in line with the fin box.

Step 4

Turn the lever so that it is in line with the fin box, this ensures that the fin is locked in the fin box. If the lever is difficult to turn, rub the T-nut on the top or bottom of the finbox groove. Lightly push the fin up or down to find a position where the lever can be easily turned. You can then push the fin back into the fin box.

Shop your own VMG blades